what we profile every day.
OneLaser cuts mild steel, stainless steel, aluminium, brass, copper and galvanised steel, from 0.3 mm, on sheet up to 3 × 1.5 m in Gateshead. Thickness limits and typical uses below; every figure is held on the machine, not in a brochure.
clean fibre-cut edgemild steel
| thickness | 0.3 to 18 mm |
| typical use | structural, OEM, batch work |
brushed or mirror finishstainless steel
| thickness | 0.3 to 18 mm |
| typical use | facings, brackets, architectural |
light, bright, flataluminium
| thickness | 0.3 to 10 mm |
| typical use | trays, panels, lightweight parts |
warm, decorativebrass
| thickness | 0.3 to 6 mm |
| typical use | trim, fittings, decorative |
rich, reddenedcopper
| thickness | 0.3 to 4 mm |
| typical use | electrical, decorative, heat |
spangled zinc coatgalvanised steel
| thickness | 0.3 to 6 mm |
| typical use | ducting, enclosures, outdoor |
Through our network of suppliers we cut mild steel, stainless steel, aluminium, brass, copper and galvanised steel — and you are welcome to supply your own material for us to cut. No grades to specify: tell us the material and thickness and we take it from there.
Tell us the material and thickness and we take it from there — there are no grades to specify. If a material is not the right choice for the job, we will say so before we cut it.
Material certification and traceability available on request for structural and OEM work.
got a drawing ready?
Drop a DXF, DWG or STEP and get a price back within one working day. £75 minimum order, no drawn-out quoting chain.
- 01upload
- 02price
- 03cut
- 04delivered